Outils et ressources
Spécifications du produit
Configuration | Élément |
Largeur de friction | 1,25 |
Taille | 3,94 |
Type | EB |
Air Tube Cavity (dm3) | 0 08 |
Cavité de tube d'air (po3) | 5 |
Intervalle d'alésage max (po) | 1,5 |
Intervalle d'alésage max (mm) | 38 |
Intervalle d'alésage min (po) | 0,88 |
Intervalle d'alésage min (mm) | 22 |
Cs Centrifugal Loss (bar/rpm2) | * |
Cs Centrifugal Loss (psi/rpm2) | * |
D1 (po) | 1,5 |
D1 (mm) | 38 |
D2 (po) | 1,75 |
D2 (mm) | 44 |
D24 (po) | 0,75 |
D24 (mm) | 19 |
Surface de frottement (cm2) | 84 |
Surface de frottement (po2) | 13 |
Épaisseur de doublure de frottement, neuf (po) | Lining molded into rubber tube. Complete element should be replaced when dimension H6 is worn to 3,88 in (98 mm) diameter. |
Friction Lining Thickness New (mm) | Lining molded into rubber tube. Complete element should be replaced when dimension H6 is worn to 3,88 in (98 mm) diameter. |
Épaisseur de doublure de frottement, usé (po) | Lining molded into rubber tube. Complete element should be replaced when dimension H6 is worn to 3,88 in (98 mm) diameter. |
Friction Lining Thickness Worn (mm) | Lining molded into rubber tube. Complete element should be replaced when dimension H6 is worn to 3,88 in (98 mm) diameter. |
H13 (po) | 2,75 |
H13 (mm) | 70 |
H2 (po) | 2,12 |
H2 (mm) | 54 |
H6 (po) | 3,94 |
H6 (mm) | 100 |
J (kg.m2) | S.O. |
L No (in) | 4 |
L No (mm) | 4 |
L Size (in) | 43236 |
L Size (mm) | 43236 |
Masse (kg) | 1 0 |
Diamètre de tambour maximal (po) | 4,09 |
Diamètre de tambour maximal (mm) | 104 |
Vitesse maximale (tr/min) | 1800 |
O (po) | 0,31 |
O (mm) | 8 |
Référence | 143019 |
Q (deg) (po) | 45 |
Q (deg) (mm) | 45 0 |
Q4 (in) | 43104 |
Q4 (mm) | 43104 |
Taille | 4EB125 |
Couple nominal (N.m à 5 2 bars) | 44 1 |
Couple nominal (lb.po @ 75 psi) | 390 |
V (po) | 0,25 |
V (mm) | 6 |
W No (po) | 10 |
W No (mm) | 10 |
Largeur W (po) | 1,25 |
Poids (lb) | 2,3 |
Wk2 (lb.pi2) | 0,01 |